13549213581 肖生

 

Victron® 095

 

Polyetheretherketone

 

Asia International Enterprise (Hong Kong) Limited

 

Technical Data

 

Product Description

 

Polyaryletherketones (Abbr. PEEK) is a crystalline high performance polymer with outstanding heat resistance, excellent strength and thermal properties. PEEK can compete with metals in lots of fields, its uniquely structure and properties offer outstanding fatigue and abrasion resistances, self-lubricated, excellent electrical properties, radiation resistance, and can withstand extreme temperatures difference environments. PEEK are highly used in electronics and electrical, automotives, mechanical and chemical, aerospace, military, and many high-end industries.

 

General

 

Material Status • Commercial: Active

Literature 1 • Technical Datasheet (English)

Search for UL Yellow Card • Asia International Enterprise (Hong Kong) Limited

Availability • Africa & Middle East • Europe • North America

• Asia Pacific • Latin America

• Crystalline • Good Electrical Properties • Radiation (Gamma) Resistant

Features • Fatigue Resistant • High Heat Resistance

• Self Lubricating

• Good Abrasion Resistance • High Strength

• Aerospace Applications • Electrical/Electronic

Uses Applications • Military Applications

• Automotive Applications • Medical/Healthcare

Applications

Forms • Pellets

Physical Nominal Value (English) Nominal Value (SI) Test Method

Density 1.30 g/cm³ 1.30 g/cm³ ISO 1183

Molding Shrinkage ISO 294-4

Across Flow 1.2 % 1.2 %

Flow 0.70 % 0.70 %

Water Absorption (Saturation, 73°F (23°C)) 0.50 % 0.50 % ISO 62

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Tensile Stress (Yield) 13800 psi 95.0 MPa ISO 527-2/1270

Tensile Strain (Break) > 70 % > 70 % ISO 527-2/50

Flexural Modulus 3 580000 psi 4000 MPa ISO 178

Flexural Stress 3 23900 psi 165 MPa ISO 178

Abrasion (73°F (23°C)) 0.340 0.340 ISO 8295

Impact Nominal Value (English) Nominal Value (SI) Test Method

Notched Izod Impact Strength 3.3 ft•lb/in² 7.0 kJ/m² ISO 180

Unnotched Izod Impact Strength > 19 ft•lb/in² > 40 kJ/m² ISO 180

Hardness Nominal Value (English) Nominal Value (SI) Test Method

Rockwell Hardness (M-Scale) 99 99 ISO 2039-2

Thermal Nominal Value (English) Nominal Value (SI) Test Method

Heat Deflection Temperature ISO 75-2/A

264 psi (1.8 MPa), Unannealed 320 °F 160 °C

Vicat Softening Temperature 599 °F 315 °C ISO 306/B50

CLTE - Flow (-4 to 302°F (-20 to 150°C)) 2.6E-4 in/in/°F 4.7E-4 cm/cm/°C ISO 11359-2

Thermal Conductivity 1.7 Btu•in/hr/ft²/°F 0.25 W/m/K ISO 8302

Electrical Nominal Value (English) Nominal Value (SI) Test Method

Volume Resistivity > 1.0E+15 ohms•cm > 1.0E+15 ohms•cm IEC 60093

Electric Strength (in Oil) 640 V/mil 25 kV/mm IEC 60243-1

Dielectric Constant (1 MHz) 3.30 3.30 IEC 60250

Dissipation Factor (1 MHz) 3.0E-3 3.0E-3 IEC 60250

Comparative Tracking Index 200 V 200 V IEC 60112

Flammability Nominal Value (English) Nominal Value (SI) Test Method

Flame Rating (0.0630 in (1.60 mm)) V-0 V-0 UL 94

 

 

 

 

 

聚醚醚酮,PEEK Victron® 095是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生