13549213581 肖生

 

VICOTE® F804

 

Polyetheretherketone

 

Victrex plc

 

Technical Data

 

Product Description

 

VICOTE F804 has been specifically formulated to provide a resilient coating with high wear and abrasion resistance on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other coatings would potentially fail. Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical and radiation resistance. VICOTE dispersions

 

have a low level of extractables and inherently flame retardant. Contact Victrex for further details.

 

VICOTE F804 dispersions are aqueous based, however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.

 

The PEEK polymer contained in the VICOTE dispersions like other non coating grades of VICTREX® PEEK™ polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK is renowned for. For further chemical resistance information consult the Victrex Chemical Resistance Data sheets.

 

General

 

Material Status • Commercial: Active

Literature 1 • Brochure - Chemical Resistance (English)

Technical Datasheet (English)

•

Search for UL Yellow Card • Victrex plc

Availability • Asia Pacific • Europe • North America

• Flame Retardant • Good Wear Resistance

Features • Good Abrasion Resistance • High Heat Resistance • Resilient

• Good Chemical Resistance • Radiation (Gamma) Resistant

Uses • Coating Applications

Agency Ratings • FDA 21 CFR 175.300

Forms • Liquid

Processing Method • Coating • Spraying

Mechanical Nominal Value (English) Nominal Value (SI) Test Method

Coefficient of Friction 3 0.53 0.53 ASTM G133

Thermal Nominal Value (English) Nominal Value (SI)

Continuous Use Temperature 500 °F 260 °C

Additional Information Nominal Value (English) Nominal Value (SI) Test Method

Cross Hatch Adhesion 4 ISO 2409

Aluminum 0.00 0.00

Mild Steel 0.00 0.00

Stainless Steel 0.00 0.00

Direct Impact 5 ISO 6272

Height 39 in 100.00 cm

Indentation depth 0.59 in 1.50 cm

Weight 1000 g 1000 g

Konig Hardness ISO 1522

1.6 to 2.0 mil (40.0 to 50.0 µm) 3.3 min 3.3 min

 

 

 

 

 

 

聚醚醚酮,PEEK VICOTE® F804是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生