|
聚醚醚酮,PEEK VICTREX® PEEK 450CA20东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
VICTREX® PEEK 450CA20
Polyetheretherketone
Victrex plc
Technical Data
Product Description
High performance thermoplastic material, 20% carbon fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, FDA food contact compliant, colour black.
Applications for higher strength and stiffness in a static or dynamic system. Excellent wear resistance, low coefficient of friction, low coefficient of thermal expansion. Chemically resistant to aggressive environments.
General
Material Status • Commercial: Active
• Brochure - Chemical Resistance (English)
• Processing - Victrex PEEK Compression Molding Guide (English)
Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)
Processing - Victrex PEEK Finishing Operations (English)
•
• Processing - Victrex PEEK Injection Molding Guide (English)
• Technical Datasheet (English)
UL Yellow Card 2 • E161131-531783
E161131-101337309
•
Search for UL Yellow Card • Victrex plc
• VICTREX® PEEK
Availability • Asia Pacific • Europe • North America
Filler / Reinforcement • Carbon Fiber, 20% Filler by Weight
• Food Contact Acceptable • Good Wear Resistance • Low Friction
Features • Good Chemical Resistance • High Stiffness
• Semi Crystalline
• Good Flow • High Strength
Agency Ratings • FDA Food Contact, Unspecified Rating
Appearance • Black
Forms • Granules
Processing Method • Extrusion • Injection Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density 4 1.37 g/cm³ 1.37 g/cm³ ISO 1183
Spiral Flow 5, 6 3.94 in 10.0 cm Internal Method
Molding Shrinkage 7 ISO 294-4
Across Flow 0.70 % 0.70 %
Flow 0.20 % 0.20 %
Water Absorption ISO 62
73°F (23°C), 24 hr, 0.126 in (3.20 mm) 0.050 % 0.050 %
Saturation, 73°F (23°C), 0.126 in (3.20 mm) 0.40 % 0.40 %
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus (73°F (23°C)) 2.61E+6 psi 18000 MPa ISO 527-2
Tensile Stress (Break, 73°F (23°C)) 30500 psi 210 MPa ISO 527-2
Tensile Strain (Break, 73°F (23°C)) 2.1 % 2.1 % ISO 527-2
Flexural Modulus (73°F (23°C)) 2.32E+6 psi 16000 MPa ISO 178
Flexural Stress (73°F (23°C)) 45000 psi 310 MPa ISO 178
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact Strength (73°F (23°C)) 3.8 ft•lb/in² 8.0 kJ/m² ISO 180/A
Unnotched Izod Impact Strength (73°F (23°C)) 21 ft•lb/in² 45 kJ/m² ISO 180
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Shore Hardness (Shore D) 86 86 ISO 868
VICTREX® PEEK 450CA20
Polyetheretherketone
Victrex plc
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Heat Deflection Temperature ISO 75-2/Ae
264 psi (1.8 MPa), Unannealed 617 °F 325 °C
Glass Transition Temperature 289 °F 143 °C ISO 11357-2
Melting Temperature 649 °F 343 °C ISO 11357-3
CLTE ISO 11359-2
Flow : > 289°F (> 143°C) 4.4E-6 in/in/°F 8.0E-6 cm/cm/°C
Flow : < 289°F (< 143°C) 4.4E-6 in/in/°F 8.0E-6 cm/cm/°C
Transverse : < 289°F (< 143°C) 2.5E-5 in/in/°F 4.5E-5 cm/cm/°C
Transverse : 289°F (143°C) > 6.1E-5 in/in/°F > 1.1E-4 cm/cm/°C
Specific Heat (73°F (23°C)) 0.430 Btu/lb/°F 1800 J/kg/°C DSC
Thermal Conductivity (73°F (23°C)) 6.6 Btu•in/hr/ft²/°F 0.95 W/m/K ISO 22007-4
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Volume Resistivity 8 (73°F (23°C)) 1.0E+7 ohms•cm 1.0E+7 ohms•cm IEC 60093
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Glow Wire Flammability Index IEC 60695-2-12
0.0787 in (2.00 mm) 1760 °F 960 °C
Toxicity NES 713
CO Content 0.0500 0.0500
CO2 Content 0.120 0.120
Total Gases 0.170 0.170
Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method
Melt Viscosity (752°F (400°C)) 550 Pa•s 550 Pa•s ISO 11443
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 248 to 302 °F 120 to 150 °C
Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr
Hopper Temperature < 212 °F < 100 °C
Rear Temperature 707 °F 375 °C
Middle Temperature 716 to 725 °F 380 to 385 °C
Front Temperature 734 °F 390 °C
Nozzle Temperature 743 °F 395 °C
Mold Temperature 356 to 410 °F 180 to 210 °C
Injection Notes
Runner: Die / nozzle >3mm, manifold >3.5mm
Gate: >2mm or 0.5 x part thickness
聚醚醚酮,PEEK VICTREX® PEEK 450CA20是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
