|
聚醚醚酮,PEEK VICTREX® PEEK 600G东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
VICTREX® PEEK 600G
Polyetheretherketone
Victrex plc
Technical Data
Product Description
High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low flow, FDA food contact compliant, colour natural/beige.
Applications for higher strength and stiffness as well as high ductility. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.
General
Material Status • Commercial: Active
• Brochure - Chemical Resistance (English)
• Processing - Victrex PEEK Compression Molding Guide (English)
Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)
Processing - Victrex PEEK Finishing Operations (English)
•
• Processing - Victrex PEEK Injection Molding Guide (English)
• Technical Datasheet (English)
Search for UL Yellow Card • Victrex plc
• VICTREX® PEEK
Availability • Asia Pacific • Europe • North America
• Ductile • Good Sterilizability • Low Flow
Features • Food Contact Acceptable • High Stiffness
• Semi Crystalline
• Good Chemical Resistance • High Strength
Uses • Medical/Healthcare • Non-specific Food Applications
Applications
Agency Ratings • FDA Food Contact, Unspecified Rating
Appearance • Beige • Natural Color
Forms • Granules
Processing Method • Extrusion • Injection Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density ISO 1183
-- 3 1.26 g/cm³ 1.26 g/cm³
-- 4 1.30 g/cm³ 1.30 g/cm³
Spiral Flow 5, 6 3.35 in 8.50 cm Internal Method
Molding Shrinkage 7 ISO 294-4
Across Flow 1.3 % 1.3 %
Flow 1.0 % 1.0 %
Water Absorption ISO 62
73°F (23°C), 24 hr, 0.126 in (3.20 mm) 0.070 % 0.070 %
Equilibrium, 73°F (23°C), 0.126 in (3.20 mm), 0.40 % 0.40 %
50% RH
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus (73°F (23°C)) 537000 psi 3700 MPa ISO 527-2
Tensile Stress (Yield, 73°F (23°C)) 13800 psi 95.0 MPa ISO 527-2
Tensile Strain (Break, 73°F (23°C)) 45 % 45 % ISO 527-2
Flexural Modulus (73°F (23°C)) 595000 psi 4100 MPa ISO 178
Flexural Stress ISO 178
3.5% Strain, 73°F (23°C) 16700 psi 115 MPa
73°F (23°C) 8 22500 psi 155 MPa
257°F (125°C) 11600 psi 80.0 MPa
347°F (175°C) 2470 psi 17.0 MPa
527°F (275°C) 1740 psi 12.0 MPa
VICTREX® PEEK 600G
Polyetheretherketone
Victrex plc
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Compressive Stress ISO 604
73°F (23°C) 17400 psi 120 MPa
248°F (120°C) 10200 psi 70.0 MPa
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact Strength (73°F (23°C)) 4.5 ft•lb/in² 9.5 kJ/m² ISO 180/A
Unnotched Izod Impact Strength (73°F (23°C)) No Break No Break ISO 180
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Heat Deflection Temperature ISO 75-2/Af
264 psi (1.8 MPa), Unannealed 306 °F 152 °C
Glass Transition Temperature 289 °F 143 °C ISO 11357-2
Melting Temperature 649 °F 343 °C ISO 11357-3
CLTE ISO 11359-2
Flow : < 289°F (< 143°C) 1.9E-4 in/in/°F 3.5E-4 cm/cm/°C
Flow : > 289°F (> 143°C) 8.3E-4 in/in/°F 1.5E-3 cm/cm/°C
Transverse : < 289°F (< 143°C) 3.1E-4 in/in/°F 5.5E-4 cm/cm/°C
Transverse : > 289°F (> 143°C) 7.8E-4 in/in/°F 1.4E-3 cm/cm/°C
Specific Heat (73°F (23°C)) 0.526 Btu/lb/°F 2200 J/kg/°C ASTM C351
Thermal Conductivity (73°F (23°C)) 2.0 Btu•in/hr/ft²/°F 0.29 W/m/K ISO 22007-4
Electrical Nominal Value (English) Nominal Value (SI) Test Method
Volume Resistivity IEC 60093
73°F (23°C) 1.0E+16 ohms•cm 1.0E+16 ohms•cm
257°F (125°C) 1.0E+15 ohms•cm 1.0E+15 ohms•cm
527°F (275°C) 1.0E+9 ohms•cm 1.0E+9 ohms•cm
Electric Strength (0.0787 in (2.00 mm)) 580 V/mil 23 kV/mm IEC 60243-1
Dielectric Constant IEC 60250
73°F (23°C), 50 Hz 3.20 3.20
392°F (200°C), 50 Hz 4.50 4.50
Dissipation Factor (73°F (23°C), 1 MHz) 3.0E-3 3.0E-3 IEC 60250
Comparative Tracking Index 150 V 150 V IEC 60112
Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method
Melt Viscosity (752°F (400°C)) 450 Pa•s 450 Pa•s ISO 11443
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 248 to 302 °F 120 to 150 °C
Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr
Hopper Temperature < 212 °F < 100 °C
Rear Temperature 698 °F 370 °C
Middle Temperature 707 to 716 °F 375 to 380 °C
Front Temperature 725 °F 385 °C
Nozzle Temperature 734 °F 390 °C
Mold Temperature 374 to 428 °F 190 to 220 °C
Injection Notes
Runner: Die / nozzle >3mm, manifold >3.5mm
Gate: >1mm or 0.5 x part thickness
聚醚醚酮,PEEK VICTREX® PEEK 600G是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
