|
聚醚醚酮,PEEK VICTREX® PEEK 600PF东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
VICTREX® PEEK 600PF
Polyetheretherketone
Victrex plc
Technical Data
Product Description
High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, fine powder for compression moulding, low flow, FDA food contact compliant, colour natural.
General
Material Status • Commercial: Active
• Brochure - Chemical Resistance (English)
• Processing - Victrex PEEK Compression Molding Guide (English)
Literature 1 • Processing - Victrex PEEK Extrusion Guide (English)
Processing - Victrex PEEK Finishing Operations (English)
•
• Processing - Victrex PEEK Injection Molding Guide (English)
• Technical Datasheet (English)
Search for UL Yellow Card • Victrex plc
• VICTREX® PEEK
Availability • Asia Pacific • Europe • North America
Features • Food Contact Acceptable • Low Flow • Semi Crystalline
Agency Ratings • FDA Food Contact, Unspecified Rating
Appearance • Natural Color
Forms • Powder
Processing Method • Compression Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Density 1.30 g/cm³ 1.30 g/cm³ ISO 1183
Apparent Density 0.30 g/cm³ 0.30 g/cm³ ISO 1183
Average Particle Size 2.8 mil 70 µm ISO 13320-1
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Modulus (73°F (23°C)) 537000 psi 3700 MPa ISO 527-2
Tensile Stress (Yield, 73°F (23°C)) 13100 psi 90.0 MPa ISO 527-2
Tensile Strain (Break, 73°F (23°C)) 30 % 30 % ISO 527-2
Flexural Modulus (73°F (23°C)) 595000 psi 4100 MPa ISO 178
Flexural Stress (73°F (23°C)) 21800 psi 150 MPa ISO 178
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact Strength (73°F (23°C)) 3.6 ft•lb/in² 7.5 kJ/m² ISO 180/A
Unnotched Izod Impact Strength (73°F (23°C)) No Break No Break ISO 180
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Glass Transition Temperature 289 °F 143 °C ISO 11357-2
Melting Temperature 649 °F 343 °C ISO 11357-3
Fill Analysis Nominal Value (English) Nominal Value (SI) Test Method
Melt Viscosity (752°F (400°C)) 450 Pa•s 450 Pa•s ISO 11443
Additional Information Nominal Value (English) Nominal Value (SI)
Compression Molding Temperature 716 to 752 °F 380 to 400 °C
Drying Temperature 248 to 302 °F 120 to 150 °C
Drying Time 3.0 to 5.0 hr 3.0 to 5.0 hr
聚醚醚酮,PEEK VICTREX® PEEK 600PF是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
